Jeenxi

UH-500

  • Specifications
  • Accessories
  MODEL UNIT UH-500 UH-500D
Travel X axis travel mm 1100 1100
Y axis travel mm 600 600
Z axis travel (Vertical) mm 610 610
Z axis travel (Horizontal) mm 710 710
Table area mm 1250 x 620 1250 x 620
T-slot mm 18 x 125 x 5 18 x 125 x 5
Spindle nose to worke table surface (vertical) mm 50~660 50~660
Spindle center to work table surface (horizontal) mm 195~905 195~905
3 axes guideways type   Roller Linear (45/45/45) Roller Linear (45/45/45)
Ballscrew diameter X/Y/Z mm 45 / 40 / 40 45 / 40 / 40
Pitch of ballscrew X/Y/Z mm  10 / 10 / 12  10 / 10 / 12
Swivel head (B axis) Built-in spindle max. speed rpm 15000 15000
Spindle power (Fanuc) kw 17/23 17/23
Spindle power (Siemens) kw 23 23
B axis swivelling range ° 120°~ –15° 120°~ –120°
Spindle taper   BBT-40 / HSKA63  (opt.) BBT-40 / HSKA63  (opt.)
Indexing accuracy (B axis) sec. 20" 20"
Repeatability (B axis) sec. 6" 6"
Rotary table (C axis) Rotary table diameter mm ∮500 ∮500
Indexing resolution 0.001° 0.001°
Drive method   Worn wheel DD motor
Max. speed rpm 25 800
Max. table load kgs 500 500
Feedrate Cutting feedrate m/min 1-10m/min 1-10m/min
X/Y/Z axis servo motor (Fanuc) kw 4 / 4 / 7 4 / 4 / 7
X/Y/Z axis servo motor (Siemens) kw 4.9 / 4.9 / 4.4 4.9 / 4.9 / 4.4
Rapid traverse(X/Y/Z) m/min 30 / 30 / 24 30 / 30 / 24
Auto Tool Changer Magazine type   Arm type Arm type
Tool magazine capacity set 24 / 30  (opt.) 24 / 30  (opt.)
Max. tool weight kgs 7 7
Max. tool length mm 250 250
Other Air supply required kgs/cm² 6 6
Power supply required KVA 40 40
Machine weight kgs 7800 7800
Floor space (L x W x H) mm 4500 x 2565 x 3050 4500 x 2565 x 3050


Standard Accessories

  1. Built-in spinde speed 15000rpm (BBT40)
  2. Arm type ATC 24-tools
  3. Full sealed splash guarding
  4. Roller type linear guideways
  5. B axis optical encoder
  6. Chain type chip conveyor
  7. Rigid tapping
  8. Cutting coolant nozzle
  9. Cutting air blast system
  10. Spindle splash ring
  11. Spindle oil chiller
  12. Auto lubrication system
  13. Heat exchanger
  14. LED warning light
  15. Air gun
  16. Coolant gun
  17. LED work lamp


Optional Accessories

  • Coolant through spindle 20bar / 70bar
  • Arm type tool changer 30-tools
  • Coolant through ballscrews
  • C axis optical encoder
  • Tool measurement system
  • Workpiece measurement system
  • Air conditioner for electical cabinet
  • Transformer
  • Stablizer
  • Disc type oil skimmer