JHV-710 • JHV-800
Product Description

JHV-710

  • X axis 710 mm
  • Y axis 460 mm
  • Z axis 580 mm

JHV-800

  • X axis 800 mm
  • Y axis 500 mm
  • Z axis 580 mm
Contents Items Units JHV-710 JHV-800
3- Axes travel X axis travel mm 710 800
Y axis travel mm 460 500
Z axis travel mm 580 580
Distance from spindle nose
to table surface
mm 120-700 120-700
Table Table area mm 760 x 420 900 x 500
Max. load of table kgs 450 500
T- slot mm 3 x 14 x 126 5 x 18 x 100
Spindle Spindle taper type BT-40 BT-40
Belt type rpm 10000 10000
Direct drive - opt. rpm 10000 / 12000 / 15000 10000 / 12000 / 15000
Spindle motor kw 5.5 / 7.5 5.5 / 7.5
Spindle cooling type oil cooler oil cooler
Feed Rate Rapid traverse (X,Y,Z) m/min 30 / 30 / 24 30 / 30 / 24
Cutting feed rate mm/min 1-15000 1-15000
X,Y,Z axis servo motor (FANUC) kw 1.2 / 1.8 / 3.0 1.2 / 1.8 / 3.0
X,Y,Z axis servo motor (MITSUBISHI) kw 1.5 / 1.5 / 2 1.5 / 1.5 / 2
A.T.C Magazine type type Arm Arm
Tool magazine capacity pcs 24 24
Max. tool diameter mm 75 / 150 75 / 150
Max. tool length mm 250 250
Max. tool weight kgs 7 7
Tool selection type Random Random
Others Power consumption KVA 20 20
Floor space (L x W x H) mm 2400 x 2600 x 2800 2400 x 2600 x 2800
Machine weight kgs 4300 4500
*Design and specifications are subject to change without prior notice.

Standard Accessories

  1. Full splash guard
  2. Belt type spindle 10000 rpm BT40
  3. Spindle motor 5.5/7.5 kw
  4. Arm type ATC 24 tools, BT40
  5. Rigid tapping
  6. Cooling system
  7. Auto lubrication system
  8. Spindle oil cooler unit
  9. Heat exchanger
  10. Telescopic cover for 3 axes
  11. Work lamp
  12. Three-color call light
  13. Tool box
  14. Coolant gun
  15. Screw type chip conveyor with chip cart

Optional Accessories

  1. Transformer
  2. CE Mark
  3. Spindle motor 7.5/11 kw
  4. Armless type ATC 20 tools, BT40
  5. Belt type spindle 12000 rpm, BT40
  6. Direct drive spindle 10000/12000/15000 rpm
  7. Built-in type spindle 24000/30000/36000 rpm
  8. Rear coolant flushing device
  9. Disk type oil skimmer
  10. Coolant through spindle (with sealed splash guard)
  11. Chain type chip conveyor with chip cart
  12. Roller type linear guideway
proimages/pro/acc-710-1.jpg
Precision Ballscrews

Pre-tensioned ballscrews on X, Y, Z axes ensure accuracy and eliminate positioning error

proimages/pro/acc-710-2.jpg

Headstock design with spindle air blast system also there is spindle oil cooling device available as standard to eliminate heat cause of spindle high speed rotation, ensure spindle accuracy and life lasting