UH-500
Product Description

UH-500

  • X axis 1100 mm
  • Y axis 600 mm
  • Z axis 610 mm (Vertical)
  • Z axis 710 mm (Horizontal)
  • Rotary table dia.: Ø 500 mm
Contents Items Units UH-500 UH-500D
Travel X axis travel mm 1100 1100
Y axis travel mm 600 600
Z axis travel (Vertical) mm 610 610
Z axis travel (Horizontal) mm 710 710
Table area mm 1250 x 620 1250 x 620
T-slot mm 18 x 125 x 5 18 x 125 x 5
Spindle nose to worke table surface (vertical) mm 50~660 50~660
Spindle center to work table surface (horizontal) mm 195~905 195~905
3 axes guideways type mm Roller Linear (45/45/45) Roller Linear (45/45/45)
Ballscrew diameter X/Y/Z mm 45 / 40 / 40 45 / 40 / 40
Pitch of ballscrew X/Y/Z mm  10 / 10 / 12  10 / 10 / 12
Swivel head (B axis) Built-in spindle max. speed rpm 15000 15000
Spindle power (Fanuc) kw 15 / 18.5 15 / 18.5
Spindle power (Siemens) kw 27.5 27.5
B axis swivelling range ° 120°~ –120° 120°~ –120°
Spindle taper   BBT-40 / HSKA63  (opt.) BBT-40 / HSKA63  (opt.)
Indexing accuracy (B axis) sec 20" 20"
Repeatability (B axis) sec 6" 6"
Rotary table (C axis) Rotary table diameter mm ∮500 ∮500
Indexing resolution  degree 0.001° 0.001°
Drive method   Worm wheel DD motor
Max. speed rpm 25 800
Max. table load kgs 500 500
Feed Rate Cutting feedrate m/min 1-10m/min 1-10m/min
X/Y/Z axis servo motor (Fanuc) kw 4 / 4 / 7 4 / 4 / 7
X/Y/Z axis servo motor (Siemens) kw 4.9 / 4.9 / 4.4 4.9 / 4.9 / 4.4
Rapid traverse(X/Y/Z) m/min 30 / 30 / 24 30 / 30 / 24
Auto Tool Changer Magazine type   Arm type Arm type
Tool magazine capacity set 24 / 30  (opt.) 24 / 30  (opt.)
Max. tool weight kgs 7 7
Max. tool length mm 250 250
Others Air supply required kgs/cm² 6 6
Power supply required KVA 40 40
Machine weight kgs 9200 9200
Floor space (L x W x H) mm 4500 x 2565 x 3050 4500 x 2565 x 3050
*Design and specifications are subject to change without prior notice.

Standard Accessories

  1. Built-in spinde speed 15000rpm (BBT40)
  2. Arm type ATC 24-tools
  3. Full sealed splash guarding
  4. Roller type linear guideways
  5. B axis optical encoder
  6. Z axis ballscrews with oil chiller
  7. Chain type chip conveyor
  8. Rigid tapping
  9. Cutting coolant nozzle
  10. Cutting air blast system
  11. Spindle splash ring
  12. Spindle oil chiller
  13. Auto lubrication system
  14. Heat exchanger
  15. LED warning light
  16. Air gun
  17. Coolant gun
  18. LED work lamp

Optional Accessories

  1. Coolant through spindle 20bar / 70bar
  2. Arm type tool changer 30-tools
  3. X/Y axes ballscrew with oil chiller
  4. C axis optical encoder
  5. Tool measurement system
  6. Workpiece measurement system
  7. Air conditioner for electical cabinet
  8. Transformer
  9. Stablizer
  10. Disc type oil skimmer
proimages/pro/acc-uh500-1.jpg
Swivel Head (B Axis)

Max. swiveling rang ± 120° Heidenhain RCN optical encoder is standard accessories

proimages/pro/acc-uh500-2.jpg
Rotary Table (C Axis)

Rotary table dia. Ø 500mm, standard with worm wheel design the max. speed 25rpm; DD motor is optional which max. speed is 800rpm.